Stability, Predictability, Consistency, and Standardization in the Flow of Commerce

The best of all possible worlds is for the government to stay out-of-the-way of commerce, industry and business, and very rarely institute regulations. There are some times when government and businesses, industry associations should collaborate for the sake of standardization, but again, very rarely. The tendency to allow industry collusion, create monopolies, duopolies or quasi-cartels is just too easy. Further, once you create one regulation it’s hard to prevent the add-on affect, the temptation is just too great to add exceptions, additions, clarifications as lawyers, unions, and consumer groups work to lobby legislators to intervene with the regulatory apparatus.

A few years back this was a big conversation at our Think Tank, and one think tanker Andrew stated: “I would have to agree that businesses do need some form of standardization, but we must also understand several concepts! A business must have the capability to micromanage for maximum efficiency. I believe states should be granted the power to standardize businesses, not the federal government.”

Okay but, where I see the definite need for standardization are with things like Internet Protocols, railway track width, freeways for intrastate travel, airport runway markings, frequencies used in communication, food safety, etc. In a big state like TX you could get away with doing almost everything counter to the overall prevailing way of doing things, it’s practically large enough to be its own country, and some Texans would prefer it to be still. Pretty independent minded, even with the population’s mindset of succession from the union. It even has its own electrical grid.

Still, with regards to the flow of energy, transportation, distribution, communication, currency, etc. we need standardization. And to the point of having each state decide, what about every county, every city, or every HOA, down to every person, where do you stop the breakdown of centralized standardization.

The argument for state level standardization could be argued against by someone who is a County Supervisor telling the State to go to hell, we want to do it our way, especially a county like the County of Los Angeles, with 16 million people in it, also larger than most countries. How about a city telling the county where to go, again as an example, let’s take the City of Los Angeles VS County of Los Angeles, see the point.

And realize I am not making an argument for a global government here, but we also need some standardization there too, for aviation, which we do have, maritime, trade rules, and having the Central Banks work together so no one Central Bank doesn’t destroy the entire global economy. See that point. We need SOME standardization, but we MUST retain regional variation. We do this at the Global Level, but we don’t do it enough at our Federal Level with regards to the states in the US and that’s why we have issues now. Think on this.

Posted in homepage | Comments Off on Stability, Predictability, Consistency, and Standardization in the Flow of Commerce

Preparing Your Car for Winter

The Canadian winter season can considerably influence driving conditions. In situations like this, drivers are more prone to accidents. It’s critical to focus on cautious driving to protect yourself and keep your family. Safe driving also helps minimize your insurance rates while reducing wear and tear on your vehicle.

Here are a few checks that you can perform to ensure that you, your family and your vehicle remain safe over the winter months:

Take your auto in for a tune up before the first snow fall. Having the peace of mind of a well maintained vehicle all year is an excellent idea, but it’s particularly essential during the winter when driving conditions are impaired.

Ensure you have the right oil for your vehicle. In general, thinner oil like 5W30 works better in cold winter conditions than 10W30 or 10W40, which are thicker. Thinner oils circulate easier, which makes lubrication of your engine easier in cold temperatures. To find the right oil for your specific vehicle, check your owner’s manual.

Keep your gas tank full. A full gas tank lowers the chances of running out of gas and being stranded. In addition, it brings down the possibility that your gas lines will freeze up because of condensation or water vapor buildup in extremely icy climates.

Ensure your battery is in great condition. Being stuck in remote areas and being unable to start your car is dangerous. Check that your battery’s connections are corrosion free and for batteries older than 3 years, consider testing its capacity to hold a charge.

Ensure you keep a winter emergency kit in your vehicle. A well thought out kit can be a lifeline in the event that you are stranded in the middle of nowhere, or on a highway. A high-quality winter kit for your car should include:
No less than one warm blanket.
A flashlight.
A shovel, in case you need to dig out of deep snow.
Additional warm garments, including boots, gloves and caps.
A well stocked first aid kit.
A bag of salt or sand to give you extra traction if you get stuck.
Food and drinking water. Foods with high sugar content are excellent choices.
Jumper cables.
A flare.
Spare windshield wipers.
Extra windshield washer fluid.

Test your tire pressure. Because of the colder air, your tire pressure tends to drop a small amount in the winter. Keeping your tires at the maker’s prescribed pressure makes your vehicle simpler to handle, making you more secure on the road and will even improve fuel economy which will save you money!

Check that your anti-freeze mixture is correct. Your coolant should have a 50-50 mix of anti-freeze and water. If you’re uncertain, you can purchase a reasonably priced anti-freeze analyzer at most automotive part stores. Keep your anti-freeze levels above 50% to prevent leaving your engine susceptible to freezing up.

Think about snow tires. If you tend to get heavy snowfall in your area, it might be worth getting snow tires for your vehicle throughout the winter months. The deeper grooves on snow tires provide substantially more traction on snow covered surfaces, which makes them able to stop your vehicle up to 40% more rapidly than all season tires. As well, snow tires are constructed with a specific type of rubber which lets them to preserve their flexibility even in coldest winter conditions.

Consider replacing your windshield wipers if they are not in good condition. Defective windshield wipers can essentially debilitate your capacity to see in wet and icy climate conditions. If your windshield wipers are not making good contact with the windshield and are not clearing it properly, they should be replaced.

Check your brakes. On the off chance that it’s been over six months since your last brake check, have them checked again before the winter driving season. With the dangerous conditions that winter brings, having the capacity to stop quickly is much more critical than in warmer climates.

Performing these checks before the ice and snow can keep your vehicle running safely and easily all winter season. This will give you one less thing to stress over when you’re driving and help to keep your auto insurance premiums low.

Posted in homepage | Comments Off on Preparing Your Car for Winter

How Can a Packaging Custom Box Increase Your Sales and Attract More Customers?

Nowadays, marketing is everything, without a proper strategy and resources for advertising your company will not produce the results that you expect. In order to create these, you will also need a nice crafted, good looking product and of course, a custom box for packaging and shipping, because look matters. Most importantly look sells, so if you want to boost your product sales than be sure you create a unique and professional image of your product using custom boxes, that fits your product and adds a visual impact that determines customers to buy it. Let’s see how your custom box should look, in order to make a hit.

What colors should I use?
Well, statistics shows that for every type of product you should use a different color, that matches the product description. For example:

For food industry is recommended to use red, because it is found in many fresh products.

Brown can be used for furniture and wooden objects because it represents the natural color of the wood.

Green in usually associated with ecological products, so if your business is anything about environment protection this is your color.

Black can be used for household objects or miscellaneous things, it inspires confidence and control, this way showing you rule the market.

White it is associated with cleaning products because when you see white usually means cleanliness.

You can combine as many colors as you want and you obviously don’t have to respect these rules but as I said, these matches the products description so these should be your first options. But color isn’t everything, style counts too so we are heading to

How should my box look and what style should I choose?
Since now minimalist look is more and more appreciated, I think that this is the best approach. Also, text logo is a trend too so keep your custom box simple but elegant, to look professional, and to guarantee you a success.

A box loaded with too many information will scare the customers and will create a less attractive design.

Using multiple colors for my box
For the minimalist design, it is recommended to use a combination of 2 colors, one for the text and one for the background, usually, a good choice is to associate red and black, or white and gold. This colors create an elegant look and add more value to the product.

You can go for white and red too, or light green and pink, there are endless possibilities to make your custom box look very appealing are stylish, and also a high contrast between the colors will create an awesome effect and it will immediately attract customers.

You can use as many colors as you want but I don’t think you want your box to look like a rainbow. Keep it simple and you will succeed.

What type of box should I use?
There are many types but you have to choose one that makes your product stand out. For example, you can use Corrugated Trays for food, a Regular Slotted Container for small objects or a Full Over Lap for heavy items, choose the one that matches your product.

Be aware of how your product looks, it is very important to attract your first-time customers by the look of your product and then by the quality.

Posted in homepage | Comments Off on How Can a Packaging Custom Box Increase Your Sales and Attract More Customers?

Are You Eligible for These Sunshine State Travel Discounts?

If a Florida vacation is in your future, then find out if you’re eligible for these travel discounts in the Sunshine State. Although they are relatively easy to get, if you don’t know how or where to apply for them, you’ll totally miss out on some hefty savings.

Save at the Toll Booth

First and foremost, if you have a significant dexterity disability, you may be eligible for a free pass when it comes to Florida’s toll roads. The Disabled Toll Permit saves drivers both time and money; and although it’s often overlooked by visitors, it’s easy to obtain if you meet the minimum qualifications.

In order to qualify for a Disabled Toll Permit you must have:

A valid driver’s license
An upper limb or dexterity disability that prevents you from tossing coins into a toll booth basket
An adapted vehicle
The permit is valid for five years, and it can be used at manned toll booths throughout the state. Just show the toll booth operator your permit, and you’re good to go. For more information about the Disabled Toll Permit, call (800) 983-2435.

Once you receive your Disabled Toll Permit, you can also apply for a Sun Pass non-revenue mini transponder. There is a $4.95 fee for this electronic device that attaches to the windshield, and allows users to pass through unmanned toll booths at no charge.

For more information about a Sun Pass non-revenue mini transponder, call the Florida Commission for the Transportation Disadvantaged at (561) 488-5344.

State Park Savings

Additionally, veterans with a service-connected disability can receive a free military entrance pass, good for admission to all Florida State Parks. This lifetime pass is valid for park admission of up to eight people, except at Ellie Schiller Homosassa Springs Wildlife and Weeki Wachee Springs parks, where it’s good for up to two people.

Proof of identification, service-connected disability and honorable discharge are required. Acceptable documentation includes:

Valid driver’s license.
Documentation from Department of Defense or another appropriate agency of service-connected disability.
DD Form 214 showing honorable discharge.
The military entrance pass can only be obtained in person at any Florida State Park. Surviving Spouses and parents of US military members who have died in combat are also eligible for this pass.

Honorably discharged veterans can also receive a 25% discount on individual or family passes. These passes, which are valid for one year, are good for admission to all parks. A valid driver’s license and a DD Form 214 are required to get the discount; and like the military entrance pass, it can only be obtained in person.

And if you don’t qualify for either of those passes, but you plan to visit a number of Florida State Parks, you can still save some money by purchasing an individual or family annual pass. These passes are good for one year and they can be purchased at any state park entrance. The individual pass is priced at $60, while the family pass costs $120.

So plan ahead, bring your documentation, and rack up some savings on your next Florida vacation.

Posted in homepage | Comments Off on Are You Eligible for These Sunshine State Travel Discounts?

3D Scanning – What You Need To Know

3D scanning is a process of capturing digital information of object shape using equipment that has light or laser to measure distance between the object and the scanner. The non-destructive and non-contact scanning technology uses lines of laser light capturing the exact shape and size of the object. The fine details of even the smallest objects are captured and the process comes in handy in so many industries and fields. Some the areas that 3D scans are commonly used include automotive, manufacturing, medical and aerospace.

3D laser scanners capture thousands of points per second, allowing quick inspection of parts. It is a process that is ideally suited for measuring and inspecting contoured surfaces and also complex geometries that require lots of data for accurate description and where traditional measurement methods are impractical.

What are the advantages?

3D scanning has become very popular among business people in different fields. You can now easily find 3D scanning services for all needs you might have especially as far as accuracy and high quality productions are concerned. The popularity of the process is as a result of the many advantages it has over other traditional options. Some of the advantages that come with the process include:

1. Quick capture of all physical measurements of any given physical object; with 3D scanning, the size of the object does not matter.

2. Saves time when designing. The high definition details of objects make it possible for designers get it right with the first trail, hence saving time, even with productions that would have otherwise proved to be complex and time consuming.

3. Ensures perfect fit of parts with the first try. 3D has literally taken the guess work of production processes, especially for those dealing with prototypes and creating parts. The detailed information collected from an object is accurate and hence it is very rare to have parts that have any functional defects.

4. It captures engineering optimization that is necessary in manufactured parts. The process offers more confident to manufacturers in terms of meeting standards and any set objectives in the manufacturing process of parts. Using the scans, it has become even possible for manufacturers and designed to compare between designed and built models conditions so manufactured parts are top quality.

How does it help the design process?

3D scans are largely used in the design process of various products. Model scanning proves beneficial in the design process because:

· It increases effectiveness when working with shapes and parts that are complex

· It provides updated versions of CAD models that are outdated

· It makes it possible to replace missing parts or older parts

· It helps product designing so that someone else’s part can be accommodated

Which areas can in be used in?

3D scanning is very effective and has become a popular option in various fields including:

· Historical artifacts

· Prototyping or reverse engineering

· Entertainment industry for games, TV and movie productions

· Medical and dental

· Inspection

· Marine

· Construction and architecture

A 3D scan can prove highly beneficial in different sectors. If you do not have what it takes to enjoy the accuracy of 3D scans, you can get help from service providers who offer all kinds of scanning services.

Posted in homepage | Comments Off on 3D Scanning – What You Need To Know

How to Get Inspired Online When Everybody Is Criticizing You

In a world full bashers and trolls, it’s quite easy to succumb to negativity. The internet is creative for people who seek a thriving environment but it can also be destructive to those who are subjected to public shaming.

Staying positive online can be challenging but here are a few thoughts to inspire you:

Everyone has imperfections.
The term “Facebook envy” is true for the majority who think highly of others because of what they see and read on social media like Facebook. Some individuals belittle themselves because their lives are not as good as what others portray online.

However, according to experts, people tend to always show their best side, so whatever posts or pictures we see is only the nice aspects of their lives. Everybody has deep dark secrets too so when someone criticizes you online, just remember that they also have unpleasant realities.

Most have fake identities.
A lot of those who are online are crass because they can easily hide their identity. They aren’t worried about real-life repercussions so they can be rude to their heart’s content. When someone online confronts you, remember that these are mere virtual components who only muster courage from word war. Maintain your decorum and ignore them.

You are worth the attention.
Negative criticism stems from the personal emotions of the person giving it. Bullies hate being topped by others that’s why they bring people down. When you are criticized, just remember that these people are interested about your life or personality and bullying is a means to get close to you. They won’t waste their time on someone not worth it.

People criticize because they don’t understand.
Closed-minded people cannot accept changes, thus they tend to oppose people who are open to it. When you receive criticism from them, just think that they are only manifesting their fears and it has nothing to do with your actions.

You are better than them.
Most of those who criticize people online are bored individuals with no accomplishments so they get envious of those who are much better than them. Look at the bright side and tell yourself that they hate you because they hate themselves.

Staying Positive

There are simple ways to boost your enthusiasm and optimism despite being surrounded by negative energy so read on.

Do what makes you happy.
Keep doing the things you love and feed your passion. Inspiration comes from personal fulfillment.

Think of inner kindness.
Think that everyone possesses innate kindness. Despite their insensitivity, people are always receptive of goodness.

Be grateful.
Always express your gratitude for the little things. Be thankful for even the bad experiences because these teach you valuable life lessons.

Rewards Yourself.
Give yourself a good massage or buy something you like. An incentive for working hard makes you feel valued.

Spend time outdoors.
The influx of technology declined people’s longing for soulful connection. Break the habit and take a vacation to rest your mind. Go on a short trip to rejuvenate and disconnect from your gadgets. Regular breaks prevent burnouts and improve mental health.

The online world can be cruel and overwhelming at times and it can be hard to manage your emotions if you tend to dwell on them. Success online can be achieved by detaching yourself from feelings and expressing your individuality.

John Richards has many years of experience creating and developing books, eBooks, manuals, and videos, on a variety of subjects, including online wealth, pet care, Internet marketing, direct mail, health and wellness, and CD/DVD distribution service.

John’s website provides ideas and practical advice for people who want to enjoy the rewards of earning an income from home using simple websites.

Posted in homepage | Comments Off on How to Get Inspired Online When Everybody Is Criticizing You

10 Important Things To Keep In Mind Before Starting An Online Business

These ten factors may not necessarily appear in the same order as listed below but certainly, they are vital for the issue at hand.

HERE ARE THE TEN QUESTIONS TO ASK YOURSELF:

1. What type of online business do I want to engage in?
2. What do I have on offer that will be better than my Competitors in my niche?
3. Do I need to prepare a business plan for my business?
4. How much will it cost to set up my business?
5. Is my business online based or BOTH online and offline?
6. Do I need a dedicated website for my business and how much will it cost?
7. How will I market my business whether online or offline?
8. What is the right strategy to use to market my business?
9. Am I getting value for money in advertising my business?
10. Am I reaching the right audience with my advertising?

Having a positive answer for all these questions can only lead you to the next stage of your pursuit of running an online business.

Engage yourself in research into the business you want to get involve in and have a go at it. Take for instance, the Mobile Phone Industry. Statistics have shown the total number of mobile phone users worldwide from 2013 to 2019. For 2017 the number of mobile phone users is forecast to reach 4.77 billion. Customers and potential customers use their mobile phones to browse the internet for Products and Services more than a Laptop or Desktop computer, so it make sense for business owners to utilize this piece of technology for marketing their products and services. This could suggest that there is an opportunity to tap into the mobile app industry to meet the needs of these businesses requiring mobile apps.

Millions of apps for almost anything you can think of, are now in circulation whether for free download or at a cost. You might ask, why don’t I have a slice of the pie and start a mobile app business? The excitement kicks in, but one has to have some kind of knowledge about the whole App design process. This will probably force you to dig deeper into your research on the whole aspect of mobile app development. With this being established, my first question is answered; through study and research, you have made an informed decision to get involved in Mobile App Design and Development. But, what will you be offering that will be better than your Competitors? This is not a simple question to answer, but to say the least, strive to offer quality products and services to customers, and simply make your Products and Services more affordable while maintaining quality.

Starting a business without some kind of a business plan is like driving onto a very long motorway with 1/4 tank of fuel, with the hope that it will take you to the next service exit. The business plan will give you a breakdown of what you need for the business even though success is not guaranteed, as there are a number of opposing factors along the way.

There are a lot of businesses with little or no startup cost as opposed to other businesses with huge startup cost. It also depends on whether your business will both be online and offline. You have to decide if the business you want to indulge in, has minimal startup cost.

To setup an online business, does not have to cost an arm and a leg, if you take the time to do extensive research into the business you want to get into.

If your business is online based, advertising it to the right audience can be a huge task. Finding the right sources to advertise your business, can be quite challenging and risky as this is where you can spend huge sums of money to advertise, but yet get little return on investment if the advertising strategy is wrong.

Advertising a business to a targeted audience involves a number of factors like;

1. Google Indexing
2. Search Engine Optimisation (SEO)
3. Domain Authority (DA)
4. Page Ranking (PR)
5. Back links
6. Social Media
7. Joining Forums
8. Blogging
9. Google AdWords
10. Google Analytics
11. Keywords Research

To do all of these stuff can be demanding and boring, but if you need success in any business, you just have to get on with the task at hand.

Handing over this challenging task to an SEO Expert can be quite expensive. If you put the time and effort in and do your research and utilize the available SEO tools on the Market, believe me, you can bring your online business to life without ‘breaking the bank’.

To conclude, I would say to minimise business startup costs, try to do as much as you can yourself. When you have exhausted all avenues, seek help.

I did not need any website design experience to build the Apptitecture’s website. Therefore, not having to ask a web designer to build a website, has saved me some money which I was able to channel elsewhere in the business. Starting an online business can be quite daunting but with hard work and determination, you can have a successful business in the end.

Posted in homepage | Comments Off on 10 Important Things To Keep In Mind Before Starting An Online Business

The 8 Questions You Must Ask Before Working With Any Business Credit Building Company

There are few business credit building companies out there, however, those that are out there are taking advantage of the lack of knowledge from the general public regarding business credit and how to get a business loan.

DON’T LET THEM RIP YOU OFF!

I’m going to try to show how to get unlimited capital for your business…

Without risking your personal assets, lowering your personal credit score, or damaging your personal credit history

These 8 Simple Questions will ensure Your Success Building Business Credit when looking for a Small Business Loan

There are simply too many people who hire business credit building companies that are not happy with the results. Before choosing another company, if you ask these 8 questions you will be assured that you will be working with a legitimate company who can help you build business credit and more importantly get the small business loan you seek. Getting that business loan is after all what you’re looking for, isn’t it?

Why is it so important to work with knowledgeable advisor? Why can’t you do it on your own? The Fair Credit Reporting Act does not apply to the business credit bureaus; this means that if you make a mistake, skip a step, try and take a short cut, your business credit file can be “Red Flagged.” This means your company is prohibited from receiving credit and perhaps that elusive business loan.

There is a proven step-by-step process that MUST be followed if you plan on properly building your business credit and getting working capital. If you don’t follow the proven process then you can be put into the “High Risk” category. When that happens, no lending institution will give you a cash advance or small business loan and there is nothing you can do to remove it.

Make sure to choose a honest credit building company that has the knowledge, experience and proven systems to support you, before you decide whom you will work with, make sure to ask them these 8 vital questions.

Question #1

Will I be obtaining only trade credit or CASH credit?

Be careful, there are a number of companies out there that will only help you obtain trade credit. Trade credit can only be used with the individual creditor, and nowhere else. This is great if you need $3000 of paper products, but is useless if you need payroll loans, inventory loans, or simply to cover business expenses or expand your company.

And if it is CASH credit, will I always need to personally guarantee the application?”

If the company says you will always have to personally guarantee all types of credit – then you are NOT receiving the full benefit of business credit. Keep in mind, the solution must introduce you to business funding services that will not require a personal guarantee, however these non traditional lenders will still be checking your personal credit and need your social security number. They do this to stay in banking compliance.

Question #2:

Will a trained coach show me, step by step, how to incorporate my business and build business credit with an eye to getting that merchant loan or business loan?

My guess is that if you wanted to figure out the intricacies of incorporating your business, and building corporate credit on your own… you would have already done so. (I’ve done it. And believe me… this is NOT stuff you want to muddle through on your own.)

So if you won’t be receiving step-by-step instructions supported by a trained credit coach, resulting in a predictable successful outcome, call another company. (I’ll spell out each step for securing business loans without traditional personal guarantees in crystal clear detail in a later article).

Question #3:

If I get stuck while I’m taking all those necessary steps, will I have to pay you hundreds or even thousands to help me figure it out?

Many companies charge low fees up front and continue to tack on heavy, additional charges each time you call or write for help.

Make sure they deliver everything you need to know to secure a bad credit business line of credit or high risk business loans, all without the traditional personal guarantee. Make sure you will have access to a dedicated coaching advisor and who places no limits on how often you can speak with them.

Question #4:

Will you have the ability to set up capital loans, and monitor the development of your business credit score with all major business credit agencies all within your coaching platform?

Why work with an advisor who is trying to blindly lead you!

Question #5:

When companies promise to get you cash credit, ask them this pointed question: “What type of paperwork is required to get cash lines of credit?

Beware of companies that say it is not required to furnish any financial statements, tax returns, business plans, bank statements, etc., to obtain a small business loan without a traditional personal guarantee. When it comes to getting approvals for cash advance without a traditional personal guarantee, you will need to show that your company is financially responsible and you do this by showing it earns revenue, pays its bills on time and has establish good business credit.

If the company tells you that you can obtain this type of financing without providing any real documents, don’t bother working with them, they are not being honest.

Think about it, is a lender really going to give you hundreds of thousand of dollars without a traditional personal guarantee without you having to show them that you are a “safe-risk?” Over time I will show you exactly what you need to do in order to become a safe risk and secure a small business loan.

Question #6:

How are your coaches paid?

This is a really important question! How would you like to work with someone that could care less if you obtain the business loan you desperately need? Think about it!

Question #7:

When it comes time to apply for a business loan, are you going to pass me off from lender to lender?

This is another very important question. Virtually every credit building company will, when it is time to apply for a business loan, pass you off to one lender to apply, and then tell you to go and apply at the next lender and so on. They literally end up sending you on a wild goose chase and just hope that one of the non traditional lenders can obtain capital loans for you. Does this sound like something a real business credit and financing expert would do?

Question #8:

What kind of a guarantee do you offer?”

It’s critical to get the specifics about guarantees. Because most companies that offer guarantees or promise only that your corporation will get a 80+ Paydex score. While this is a start, it’s not good enough –

If after completing your program, you should have:

Corporate Compliance and documentation review

D&B file and a D&B rating

D&B Paydex Score

Business credit file with Corporate Experian with an intelliscore

Business credit file with business Equifax with the appropriate business credit score.

Trade accounts and/or Vendor Accounts with and without a personal guarantee.

A Business Credit that can be used to leverage financing opportunities

This is not, by any means, a comprehensive list of all the questions entrepreneurs should ask when it comes to building corporate credit. But if you address these costly and dangerous errors, you will be on your way to building a safe, secure, and financially sound business-the business you always dreamed of!

Hopefully, these 8 questions will help ensure that you work with a credit building company that will be honest, upfront as well as help you successfully establish your business credit and leverage it into new small business loans and opportunities for your business.

Posted in homepage | Comments Off on The 8 Questions You Must Ask Before Working With Any Business Credit Building Company

The “How” And “Why” Of Electric Panels

Electric panel very simply refers to the electric board which provides electricity to the sub circuits. These panels are extensively used in Process industries, Automotive industries, Food and Beverage sector, Oil and Gas Equipment, Aerospace, Metal Forming Machinery, Machine Tools, Power Generation, R&D Testing labs and Process Industries and other industrial sectors.

Are You Banking On The Right Product?

Once you go through this post, you will actually understand why electric panels play such an important role in the aforementioned sectors. Think about the times when you experience power outage owing to a natural disaster— then you must have run to the electric panel to restore power. When it comes to electric panels, getting the right circuit breaker can make all the difference between safety and risk. These panels are generally based in backrooms, basements and less visited areas of a particular place.

The products of reputed manufacturers are known for the following aspects:

– Quality performance

– Easy installation

– Flawless design

– Power efficiency

– Low maintenance

Make sure you are checking the credentials of the manufacturer thoroughly before you are roping the same in. If you’re looking forward to install these units, you should find out about the manufacturers who are known for offering products with the aforementioned qualities.

The internet will offer you information about a lot of manufacturers providing these panels. However, one should realize that that not all of them are equally credentialed to offer you quality panels. It takes years of experience and domain expertise to manufacture panels that go on to serve you satisfactorily in the long term.

So, it is important to ensure that you’re actually taking the trouble to conduct proper market survey and then going on to settle for their product. Now, the question is – how exactly would you know that you are actually posing your faith in the right name? You can consider the following steps.

How To Settle For The Right Electric Panel

The first thing to do would be to seek recommendations from peers. Now, let us clarify from the very beginning that in order to meet the diverse quality requirements, leading manufacturers employ quality analysts who ensure that the products pass multiple quality stages before reaching you. Those who have accessed products of these manufacturers are bound to endorse their products- while those who have actually gone on to choose manufacturers arbitrarily might not as well be in a position to do so. When you are not conducting research on the background of the manufacturer, you are not even aware of whether or not the particular name is actually taking the aforementioned steps to ensure that only quality products are reaching you. Without research there is every chance of unwittingly ending up with poor quality products.

Read reviews in order to find out how the companies have been rated. Kindly ensure that you’re not leaving any stone unturned to get the best value for your money. Taking the aforementioned steps will ensure that you are not repenting your choice later on.

Posted in homepage | Comments Off on The “How” And “Why” Of Electric Panels

Sensible Manufacturing and the Ultrasonic Flow Meter

The Manufacturer MX Awards

Each year The Manufacturer MX Awards aim to recognise great achievements in the industry. Entries are invited for a number of different categories, with the ultimate title of ‘Manufacturer of the Year’ presented to a company that is strong across the board.

The winner of this year’s ‘Manufacturer of the Year’ title was announced in November and Dura Automotive took home the award. The company also returned to the office with awards for ‘People and Skills’, ‘World Class Manufacturing’ and ‘Sustainable Manufacturing’, so it was well worth attending the event!

Investment in Employees, Quality and Sustainability

Dura Automotive are an international company that design and manufacture control systems for the automotive industry. They may be a large operation, but the awards they won clearly illustrate what it takes to grow a successful business; investment in employees, quality and sustainability.

If you take a look on their website, you will see that their objectives are to ‘inspire drivers, customers, our people, the competition and stakeholders through innovation and performance’.

They understand that in order to deliver full customer satisfaction, they need to deliver high quality products. To do that, they need to stay ahead of the competition with innovative ideas, products and processes, staff training and development opportunities and a positive, customer focused vision. In addition, they understand the importance of integrating sustainability into every aspect of their business.

Sustainable Manufacturing

Sustainable manufacturing focuses on minimising the negative outcomes of production. The overriding aim is to lower the environmental impact of manufacturing and distribution, yet the real benefits to business come from the fact that in working towards sustainability is a process of continuous improvement.

Many manufacturers have been incentivised to take action. On the receiving end of Government initiatives or in a bid to reduce energy, water and waste management costs, more companies have been willing to consider sustainable options. Whilst they may have started off thinking of this as a tick box exercise, the real benefits of taking action soon become apparent. Huge savings have helped many companies to remain competitive in the global market, have paid for other investments or have boosted profits.

Flow Monitoring

When it comes to water and energy use, flow monitoring has proved valuable in running processes at optimised levels, improving quality control, minimising waste and reducing downtime due to problems in the process. This has supported significant cost savings in storage, processing, waste management and utility bills.

By investing in low cost ultrasonic flow meters, which retrofit to the exterior of pipework, flow monitoring can be straight forward to implement. Calibrated to the specific flow range of the liquid or gas that passes through the pipe, the ultrasonic flow meter provides data that quickly identifies when abnormal flow rates are detected. This acts as an early warning system, so the issue can be quickly identified and rectified.

The ultrasonic flow meter also supports the optimisation of the process, which can be highly effective in quality control. This has been widely used to reduce waste batches and waste management costs in food, pharmaceutical and automotive industries, to name but a few.

All of these potential cost savings from an affordable ultrasonic flow meter certainly justify investment in monitoring technology. Other low cost devices including tap aerators and rainwater harvesting systems have also helped UK businesses to gain a lot more than environmental credentials.

Recycled Materials

Another area in which Dura Automotive have invested is in research and developments around the use of recycled materials in their products. When manufacturers consider reusing materials rather than raw supplies, it can present a number of challenges. Being open minded to these challenges can lead to innovative thinking, fresh ideas and approaches which could open up new avenues for the product or company.

The use of recycled materials does depend on sufficient quantities being provided by a reliable source. Having said this, if a large scale operation such as Dura can find viable alternatives to raw materials, then a bit of research could lead to suitable supplies for smaller businesses.

There is often a cost in processing the material to ensure it is of a suitable standard for reuse. Companies may need to explore partnerships with other companies and other collaborative approaches to ensure that cost effective and convenient options are found.

Sustainable Advantages

Like Dura Automotive, the majority of the other manufacturing award winners also placed considerable emphasis on sustainability. If you want to see your company going from strength to strength, a greener approach could deliver many tangible advantages.

Posted in homepage | Comments Off on Sensible Manufacturing and the Ultrasonic Flow Meter